Toggle Nav
Defender 8 Stainless Steel Bird Spike (Per M)
- Stainless steel bird spikes made from super-tough durolon UV stabilised polycarbonate.
- Steel spikes protect ledges, beams, and other areas where birds nest and perch.
- The spikes provide coverage of up to 8 inches (200mm). With packs of 10 and 100, you'll be able to cover any area and surface type.
Spike Width: 150mm
In stock
SKU
defender8ss
Birds are known to nest and perch on areas such as ledges, beams and shop signage, causing extensive damage. If this common issue impacts you, you need these stainless steel bird spikes. Supplied in packs of 10, 100 or by the meter, you'll be able to manage and get rid of the most challenging bird infestations.
Installing Bird Spike:
 |
 |
 |
| Spike systems are an effective system for proofing against pigeons and gulls in most situations, however this is not recommended for smaller bird species such as sparrows. | Before installing bird spikes, it is important to make sure the area is cleaned by removing any guano and debris, such as flaking paint. This ensures proper adhesion. | Surfaces should also be cleaned and sanitised with products such as Bio-Rid to disinfect and start breaking down the guano and dirt. Ensure the surface is dry before application, for damp conditions use a product such as Fix-all. |
 |
 |
 |
| Apply silicon to the surface or base of the spike using a caulking gun, use the ridge in the base of the spike as a guide. Immediately position spike onto the surface, press down firmly in to place. | Systems with angled leading spikes offer better edge protection when installed so spikes are protruding over the edge slightly. Rows of spikes should be no further than 65mm apart for pigeons and maximum of 100mm apart for gulls. | Bird spike can be installed by using cable ties for pipes and rails or screwed on to wooden surfaces. They can also be installed on windows and gutters using specific clips. |
Write Your Own Review
