Defender Gull Spike (Per M)

A stainless steel Seagull spike with a tough Durolon UV stabilised polycarbonate base. Offers a Ledge protection of up to 11inches (275mm).

Spike Width: 200mm

In stock

SKU

gullspike

Grouped product items
Product Name	Qty
Defender Gull Spike £8.04 £6.70
Defender Gutter Clips - Pack Of 100 £37.20 £31.00
Defender Window Clips - Pack of 10 £5.88 £4.90

A stainless steel Seagull spike with a tough Durolon UV stabilised polycarbonate base. Offers a Ledge protection of up to 11inches (275mm).

Installing Bird Spike:


Spike systems are an effective system for proofing against pigeons and gulls in most situations, however this is not recommended for smaller bird species such as sparrows.	Before installing bird spikes, it is important to make sure the area is cleaned by removing any guano and debris, such as flaking paint. This ensures proper adhesion.	Surfaces should also be cleaned and sanitised with products such as Bio-Rid to disinfect and start breaking down the guano and dirt. Ensure the surface is dry before application, for damp conditions use a product such as Fix-all.

Apply silicon to the surface or base of the spike using a caulking gun, use the ridge in the base of the spike as a guide. Immediately position spike onto the surface, press down firmly in to place.	Systems with angled leading spikes offer better edge protection when installed so spikes are protruding over the edge slightly. Rows of spikes should be no further than 65mm apart for pigeons and maximum of 100mm apart for gulls.	Bird spike can be installed by using cable ties for pipes and rails or screwed on to wooden surfaces. They can also be installed on windows and gutters using specific clips.